4.
Serial Configuration
Warning : If current firmware version is higher than ver.2.09, you should
check “Debug mode”.
You can setup EG-SR-7100A’s configuration easily by sending a text configuration file
through serial.
The contents of configuration file have following meanings.
(File size is 94 bytes. This is for firmware v4.4)
Value
Description
AA
Header (Do not modify)
0008DCxxxxxx MAC address (xxxxxx is uniquely factory set)
01
Mode (MIXED mode: 01, SERVER mode: 02,Client mode: 00)
00000000
IP address
00000000
Subnet mask
00000000 Gateway address
0000
Port number (Client)
00000000
Server IP address
0000
Port number (Server)
FE
Serial speed (bps) Default is FE
BB:
230400
FF:
115200
FE:
57600
FD:
38400
FA:
19200
F4:
9600
E8:
4800
D0:
2400
A0:
1200
08
Serial data size (08: 8 bit), (07: 7 bit)
00
Parity (00: No), (01: Odd), (02: Even)
01
Stop bit
00
Flow control (00: None), (01: XON/XOFF), (02: CTS/RTS)
00
Delimiter char
0000
Delimiter size
0000
Delimiter time
0000
Delimiter idle time
00
Debug code (00: ON), (01: OFF)
03
Software major version
09
Software minor version
00
DHCP option (00: DHCP OFF, 01:DHCP ON)
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
15
