2
Getting Started
2.1.
Hardware Installation Procedure
Follow these steps to prepare the module and evaluation board for testing.
y
STEP1
:
Plug the EG-SR-7100A module into the sockets on the test board.
☞
Be careful of connecting the JP1 on the module to the correct JP1 on
the test board.
y
STEP2
:
Connect the EG-SR-7100A test board RJ-45 connector to the Ethernet
hub.
y
STEP3
:
Connect the EG-SR-7100A test board DB9 jack and serial device with
RS-232 serial line.
y
STEP4
:
Connect the 5V (500mA) DC power adaptor to the EG-SR-7100A test
board. For reference, the power used for EG-SR-7100A is 3.3V.
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
5
