3.
Firmware Uploading
3.1.
Using Configuration Tool Program
①
Run ‘7100A_C.exe’ and click “Search” button.
②
If the board is properly connected to the network, “Searching completed”
message and MAC address will be displayed on the “Board List” as shown in Fig 3.1.
③
Fig 3.1 Board Search Window
④
Select board for upload and click “Upload” button.
☞
Before upload through Ethernet, you should set the network information
of EG-SR-7100A first by Configuration Tool program as shown in Fig 3.1.
⑤
When the window as shown in Fig 3.2 is displayed, select file for upload and
click “Open” button
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
12
