8
5 ½” & 7” Housing SmartScreen Motorized Installing
These installation instructions cover both the 5 ½” and the 7” housing SmartScreen Motorized
*Motorized screen installations require at least 2 people, more may be necessary for wider screens. Please plan
accordingly
Before installing the SmartScreen Motorized units
1.
Tools Required:
a.
3/8" cordless drill
b.
¼" hex driver bit
c.
#2 Phillips driver bit
d.
3/8" drill bit (10"-14" long)
e.
3/16" drill bit
f.
1/8" drill bit
g.
3/8" hammer drill
h.
3/8" concrete drill bit (10"-14" lo ng)
i.
Concrete drill bits for 3/16" or ¼" concrete screws
j.
Small flat and Phillips head screwdrivers
k.
2’ level
l.
25’ tape measure
m.
Scissors
n.
Needle nose pliers
o.
Duct tape
p.
Silicone spray for side tracks
q.
3 prong electrical plug (1 per motor)
r.
Caulking gun with desired color caulk
s.
Chop saw with non-ferrous blade
t.
Concrete, metal or wood fasteners (minimum 2" lo ng)
u.
1” tek fasteners
*drill and fastener bits may be adjusted depending which types and sizes of fasteners are being used
2.
Contents of Shipment *contents may vary depending on type or style ordered
a.
Housing front, housing back and end caps (attached to each other)
b.
Roll tube, motor, pivot (or double idler system) and screen option
i.
Screen option will be wrapped around the tube and placed inside the housing for shipping
ii.
Motor and pivot will be in the tube
iii.
Power cord will be attached to the motor
c.
Slide bar with bottom seal attached
d.
Tracks with track covers (x2 of each piece)
e.
Remote, usually packaged with the tracks and the slide bar (if ordered)
i.
With multiple units the remote will be packaged with the tracks and slide bar in one of the units
f.
Probes (x2)
g.
2” x 2” angle (x2 of each piece if ordered)
3.
Inspect packaging for damage
a.
If packaging is damaged the unit may still be free of damage
b.
Take care opening the packages to ensure unit is not damaged while opening
c.
Inspect unit and pieces and if there is any damage report to Wizard immediately with pictures