Änderungen vorbehalten!
Subject to change without notice!
Blatt/
sheet
PM.7.002883.EN.13
Datum/
date
23.01.2013
Stand/
version
G-15.03.2016
Geprüft/
approved
WAT/MZE
Overspeed governor EOS
Operating instructions
Date of manufacturing
Type test designation
and CE-label
2.2
Compatibility
In case of using the EOS as replacement for
an older version check that the used param-
eter is the same.
With parameter Par 1 the certificate no. TÜV-A-AT-
1-13-0339EUGB-2 is compatible with TÜV-A-AT-
1/08/104CEGB/5 and older versions.
All other parameters are not compatible with
TÜV-A-AT-1/08/104CEGB/5 or older Versions.
The parameter shows the predefined setting of the
UCM-detection data. Depending on the used param-
eter the UCM contact speed (CL) and the internal
calculation rules vary, what causes different detec-
tion delay times in case of UCM between the differ-
ent parameter sets. Therefore the used EOS parame-
ter set has to be specified in the UCM-system and
the EOS could not be changed to other parameters
without checking the stopping distances according
to chapter 9.11 of EN81-1:1998+A3:2009, chapter
9.13 of EN81-2:1998+A3:2009 or chapter 5.6.7 of
EN81-20:2014 and related topics as e.g. apron
lenght.
only for EOS D200mm
Production site
