background image

Bedienungsanleitung Nr. 9999-041-0

Seite 6

B7202_E_1

.pmd

12.06.2003

8.5.1 Opening the lock with the combination interlock feature activated (duality principle)

When user combinations are employed to open the lock it is necessary to enter two different user combinations,
including the associated user number (see example below).

Once the first user combination has been entered a beep will sound every five seconds for a period of 60
seconds. If the second user combination is not entered within this 60-second limit, then the entry will be
discarded and both user combinations will have to be entered again.

Example

     °

Button       for UNo. 1
Button       for UNo. 2

etc. through to     button
for UNo. 5

°

°

Enter first user number e.g. 1
Enter first user combination e.g.
Enter second user number e.g. 4
Enter second user combination e.g.

Cancel

OK = green LED
blinks once and low-
high tone sounds.
Error = 3 high-pitched
tones and red LED
lights.

9

8

7

6

5

4

Function

Operation, button(s)

Response

Comments

Initiate programming
Select P - No. 2
Confirm the entry
Enter 6-digit master combination, e.g.
Confirm the entry
Entry
Confirm the entry

Cancel

8.5.2 Deactivating the combination interlock function (duality principle)

Possible only with the electronic lock open and only with the master combination.

Green LED blinks once

OK = green LED blinks once
and low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.

Function

Operation, button(s)

Response

Comments

Once a silent alarm has been activated, the lock will open in the same way as if the normal master combination or a user
combination had been entered. This also applies to any programmed delay period or combination interlock.

Enter UNo. and the master or user combination for silent alarm

°

° Button     for UNo. 0  (master combination)
  Button      for UNo. 1  (user combination)
  Button      for UNo. 2  (user combination)

etc. through to

  Button      for UNo. 5  (user combination)

Entering the combination:

9. Triggering a silent alarm

To trigger a silent alarm, increase by 

1

 the final digit of your master or user combination.

Example:

Master or user combination      Master or user combination for silent alarm

1 2 3 4 5 6

1 2 3 4 5 7

1 2 3 4 5 9

1 2 3 4 5 0

Summary of Contents for Insys 7202








Reviews: