4
Installation instructions Gator
Rel. 1.2
3.4 Axis length calculation input unit Gator RO (turnable)
3.4.1 In connection with Gator 2000
3.4.2 In connection with boltwork
Connection axis:
Debur the ends
L = A + 43mm (Toleranz - 4mm)
A
L
L = A + 43mm (Toleranz - 4mm)
A
L
L = A + 43mm (Toleranz - 4mm)
A
L
L = 15mm + A + X
A
15
X
Achse in axialer Richtung
gegen verschieben sichern
L
L = 15mm + A + X
A
15
X
Achse in axialer Richtung
gegen verschieben sichern
L
Secure the axis
against shifting in
axial direction.
Connection axis:
Debur the ends
L = A + 43 mm (tolerance -4 mm)
L = X + A + 15 mm (+ axial hedge)
3.5 Mounting
3.5.1 Drill pattern fixing ring Gator RO
4 x Fixing position for M4
Gator RO (fixed) - opening for cable:
Drill-hole min. Ø 8 mm/max. Ø 11,4 mm
for connection cable
Gator RO (turnable):
Hole center congruent with middle axis of
nut of the electronic lock.
Drill-hole min. Ø 9 mm/max. Ø 11,4 mm
for connection axis (see p. 3, fig. 3.2).
78
78
4,3
4
3
3
4
4,3
• From the front 4 threaded holes M4 with sufficient depth thread and 1 through-hole (opening for cable/connection axis)
have to be drilled into the safe door.
• From the front the fixing ring has to be fixed with the enclosed cylinder screws M4 x 10.
3.5.2 Mounting input unit Gator RO
Position 1
20°
Position 2
• Position 1: Mount the input unit with an angle of approx. 20° to the fixing ring.
• Position 2: Turn the input unit to the right into position. The turning has to happen easily.