13
Installation instructions Gator
Rel. 1.2
7.3.2 Dimensions lock Gator 3010 - long connection with mechanical emergency lock
Installation example
Area around the
unlocking lever must
be protected
especially.
Gator 3010
9,1
66,5
88
116
25,4
41
60,7
(X)
66,5
88
Ø 7
Ø
7
Hub/stroke 12
13,5
58,3
41
60,7
3
34
25
Mechanical
emergency lock
7.4 Dimensions lock Gator 5000/6000/8000/9000
7.4.1 Bolt stroke
Hub von 9 - 15 mm verstellbar/
Stroke adjustable from 9 - 15 mm
66,5
88,5
103,4
41
60,7
Ø 6,5
7,8
14,2
7 12
4
34
15
M
4
25,4
35,7
Attention: Bolt stroke only has to be adjust when
lock bolt is completely moved into lo-
cking position.
Adjustment screw for
bolt stroke:
Stroke length can be redu-
ced by turning clockwise.
• Gator 5000/6000/8000/9000: Stroke length can be be adjusted continuously from 9 – 15 mm (factory mode: 15 mm).
7.5 Mounting
7.5.1 Drill pattern Gator 2000/3000/3010/5000/6000/8000/9000
17,3
41
66,5
Gator 2000: Middle axis of nut of the electronic lock congruent with
middle of the input unit (Gator RO)/knob input unit (Gator R/DR)
Gator 2000: drill-hole not necessary
• For fixing the electronic lock 4 threaded holes M6 with depth min. 6 mm (or a comparable inch thread) have to be drilled
into the safe door.
• Gator 2000: Lead connection cable through the lock and adjust the electronic lock on the connection axis.
• Fixing the lock with screws M6 or a comparable inch thread. Length and material application of the screw has to be selected
such as a secure long-term stability is guaranteed.
• Turn the screws with a maximum turning force of 3.5 – 5 Nm.
• Independent loosening of the screws has to be avoided. Recommendation: put lock washers underneath the screw’s head.
• After the installation the lock’s bolt may not be loaded.
• Mind sufficient slackness of the locking point.