Wittke TWIN AUGER, Operator'S Manual

Page: 65 / 87

Operating the W
ITTKE
T
WIN
A
UGER
™ 57
Pod Inspection Procedure
Exit the cab to continue your inspection. Bring a rag along to clean all accessible lights, labels, camera
lenses, etc. Check for mechanical problems: rollers, hinges, door latches, wear items, etc. Report any
defective system to the maintenance personnel.
Pod inspection procedure:
1.
Check the dumping doors for proper latching (see Figure 4-1).
Figure 4-1 Dumping doors
2.
Press the green push-button on the in-cab/outside screw control station (see Figure 3-19 and
Figure 3-23) to make both screws rotate in a forward direction.
Both screws should be working properly while rotating in that direction.
N
OTE
:
Pressing the green push-button will make both screws rotate for 30 seconds.
Figure 4-2 Twin screws
3.
Press the yellow push-button on the in-cab/outside screw control station (see Figure 3-19 and
Figure 3-24) to make both screws rotate in a backward direction.