Wittke TWIN AUGER, Operator'S Manual

Page: 58 / 87

50 Controls and Indicators
Figure 3-22 Stop push-button
Screw Forward Push-Button (green)
This push-button (see Figure 3-23) is used to activate both screws in a forward direction for
30
seconds, after which they stop.

Press this button to activate both screws in a forward direction and clear the hopper.
Figure 3-23 Screw forward push-button
N
OTE
:
To stop both screws before the 30 seconds, press and quickly release the yellow push-button.
Both screws will then stop immediately.
Screw Rewind Push-Button (yellow)
Sometimes during food waste collection one of the screw may get jammed and therefore may no
longer move the waste into the pod. In such a situation, press the screw rewind push-button
(see Figure 3-24) to correct it. By pressing this button both screws will go the opposite way
momentarily to unjam the system. When the jamming is tough to be removed, pressing alternatively
the green and yellow push-buttons may be required.

Press this button once to rotate the screws momentarily in a backward direction to unjam the
system.