Wittke TWIN AUGER, Operator'S Manual

Page: 59 / 87

Controls and Indicators 51
Figure 3-24 Screw rewind push-button
N
OTE
:
To stop both screws from rotating in a forward direction, press and quickly release the yellow
push-button.
N
OTE
:
If you want both screws to rotate longer in a backward direction, press and hold the yellow
push-button for as long as you want.
Outdoor Screw Control Station
The W
ITTKE
T
WIN
A
UGER
™ also has an auxiliary screw control station outside the cab (see Figure
3-25), just above the front left-hand side tire guard. The main three push-buttons are the same as
those on the in-cab screw control station. For a short description of these push-buttons, refer to
In-
Cab Screw Control Station on page 49.
Figure 3-25 Outdoor screw control station
Speed-Up Control Button (optional)
Located just below the yellow push-button, the speed-up control button (see Figure 3-25) engages/
disengages the optional speed-up feature which is used to increase the engine speed up to 1500
RPM
whenever a pack or an auto-pack cycle is initiated.
Screw control
buttons
Speed-up
button