4
Reference Card Error Types (continued)
Error
Possible cause
Possible action
types
No display
or machine
not
operating
No
ingredient
Leak in
mixing
system
or
Mixing
system
overflows
Drip tray
full
Machine
does not
shut down
when drip
tray is full
Freshbrew
unit
malfunction
Poor
flavour of
drink
Inadequate
quantity of
drink
Coins
sticking
Machine
dispenses
free drinks
Sensor in drip tray is wet.
No power.
Canister empty.
Canister not correctly connected.
Ingredient sticking to auger drive
mechanism. Closed spout.
Mixing funnels/hoses not correctly
connected.
Sealing ring leaking or not installed.
Blockage in mixing funnels or
dispensing tubes.
Water dripping from hoses.
Drip tray full
Mixing funnels blocked
Foreign body clogging sensor
Freshbrew unit not correctly
assembled.
Wrong ingredients.
Fresh brew unit or dispensing system
dirty.
Ingredient residues clogging
dispensing outlet system.
Kink in outlet hose.
Coin mechanism sticking
Coin track dirty, greasy or blocked.
Price set to 0.00.
Price set to free vend.
Empty drip tray and dry sensor.
Check fuses/power cord.
Refill canister.
Reinsert canister correctly.
Remove canister, clean auger drive
mechanism and reinsert. Open spout.
Reinstall and reconnect components.
Replace sealing ring.
Replace / clean blocked part/s.
Water tank and valves must be
descaled / replaced.
Empty drip tray.
Clean mixing funnels
Clean sensor.
Reassemble freshbrew unit correctly.
Use corrrect ingredients.
Replace/clean components and rinse
thoroughly.
Replace/clean clogged component/s.
Install hose of correct length.
Press coin return button.
Clean coin track, cf. manual of supplier.
Wait for 10 seconds.
Set correct price.
Switch off free vend.
If it was impossible to remedy the fault, please contact the service.
