9
Function “keep warm”
This function of maintenance to the heat makes it possible to reach and maintain
automatically a temperature of 45 or 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
You must initially engage the cooking surface, then the zone of heating:
To engage, to start the function “ keep warm
Action
Control panel
Display
To engage
press key [ U ]
keep warm control
one time for 45°C
light is lighting
press key [ U ]
keep warm control
two time for 70°C
light is blinking
Select the desired heating zone press key [ + ] or [ - ]
[
U
] or [ U ]
To stop
press key [ + ] or [ - ]
[ 0 ] to [ 9 ]
This function can be started independently on all the heating zone.
When the pan leaves the zone of cooking the "keep warm" function remains active during
approximately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.
Automatic cooking
All the cooking zones are equipped with an automatic “go and stop” cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power
on the preselected level.
Switching on the automatic cooking
Action
Control panel
Display
Zone selection
press on key [ + ]
[ 4 ]
Full power setting
press on key [ + ]
[ 4 ] to [ 9 ]
Automatic cooking
press on key [ + ]
[ 9 ] is blinking with [ A ]
Power level selection
press on key [ - ]
[ 9 ] [ 8 ] [ 7 ] … [ 1 ]
(for example « 7 »)
[ 7 ] is blinking with [ A ]
Switching off the automatic cooking
Action
Control panel
Display
To stop the function
press the zone key [ - ]
and [ + ] simultaneously
[ 0 ]
Pause function
This function brakes all the hob’s cooking activity and allows restarting with the same settings.
Start up / Stop the pause function
Action
Control panel
Display
Engage pause
press key [ S ]
displays [ II ] in the
heating zone displays
Stop the pause
press key [ S ]
and press any key [ - ] or [+ ]
pause control light is
blinking.
