7
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
If there is no pan on the heating zone or if this pan is not adapted to the induction. In
this case it is impossible to increase the power and the display shows [ U ]. This
symbol disappears when a pan is put on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display
shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone.
The cooking continues with the power level setted before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are
still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As
far as the residual heat indicators are on light, don’t touch the heating zones and don’t put
any heat sensitive object on them.
There are risks of burn and fire.
Booster and Double Booster function
The Booster function [ P ] and the Double Booster [
] grants a boost of power to the
selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles.
Start up / Stop the 1st booster
Action
Control panel
Display
Start up the booster
press key [ P ]
control light is lighting
Zone selection
press key [ + ] or [ - ] from the desired
heating zone
[ P ]
Stop the booster
press key [ - ] from the boosted
heating zone
[ 9 ]
Start up / Stop the 2nd booster
Action
Control panel
Display
Start up the 1
st
booster
press key [ P ]
control light is lighting
Start up the 2
nd
booster
press key [ P ]
control light is blinking
Zone selection
press key [ + ] or [ - ] from the desired
heating zone
[
then P ]
Stop the booster
press key [ - ] from the boosted
heating zone
[ 9 ]
Power management
The hole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).
Heating zone selected
The other heating zone:
(example: power level 9)
[ P ] is displayed
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
