3
Important safety Instructions
This manual describes important details for users to use this product safely and correctly.
Read this manual thoroughly before you start using this product. Be sure to read and fully
understand the Safety Precautions in this manual, in particular. In addition, keep this manual
handy during use of this product, so that you can refer to it quickly when necessary.
The following instructions pertain to the risk of fire, electric shock or bodily injury. Please
read all of these instructions carefully.
1 Save these instructions for later use.
2 Follow all of the instructions and warnings marked on this product or included in this
manual.
3 Do not use this scanner on an unstable cart, stand or table. The product may fall, causing
serious damage to the product.
4 Don’t use this product on a bed, sofa, rug or other similar surface. This product should
never be placed near or over a radiator or heat register.
5 Never push objects of any kind into the scanner through the case openings, as they may
touch dangerous voltage points or short out parts that could result in a fire or electrical
shock. Never spill liquid of any kind on the product.
6 This scanner should only be connected to the + 24V / min. 2.5A DC power source or
designated power adapter indicated on your scanner information label. If you are not
sure of the type of power source available, consult your dealer or local power company.
Only connect this scanner to a power outlet that matches the power requirements of this
scanner.
7 Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
8 Do not use this scanner near water.
9.
Do not touch the power plug or USB bus power cable with wet hands. Doing so might
cause electric shock.
10. A damaged power cable or USB bus power cable may cause fire or electric shock. Do
not place heavy objects on the power or USB bus power cable, or pull, bend, twist, heat,
damage or modify the cable. Do not use damaged power or USB bus power cables or
power plugs. Do not use the power cable when the wall socket is loose.
11. Use only the specified Power, USB bus power, and interface cables. Failure to use the
correct cables might cause electric shock and equipment failure.
