www.witeg.de
witeg Labortechnik GmbH, HG-15A Homogenizer
9
2.2 Instructions
For a safety and faultless using of the device it is indispensable that you read the following
instructions purposely and follow them by the use.
Connect the device only to the suitable power supply.
Use the device only in electric circuits with ground fault circuit interrupter.
Check the power supply cord before you stick it into the electrical outlet.
Do not use power bars to extend the power supply cord.
Only use extension cables with sufficient cable cross section.
Do not touch the device with wet hands during the usage because this might cause an
electrical shock.
If unexpected sound, smell or smog is generated by the device, pull out the main plug and
contact the manufacturer or your supplier immediately.
Disconnect the power supply plug before cleaning or maintenance.
If you use radiation or contaminated samples the responsibility is only up to you.
Reparations and amendments should only made by
witeg
authorized people.
Contraventions exclude the warranty and may cause fatal injuries.
Do not use this device in area with potentially explosive atmosphere.
Use this device only if you read the whole safety instructions.
This device should only used by persons who are familiarized with safety instructions made
for laboratories.
Pay attention that no liquid reach the controller or inward of the capsule.
You have to keep the device clean if you want to get a longer life of it.
Wear corresponding protective clothing during the usage.
Pull out the power cable if you didn’t want to use the device for a longer time.
Dry run may destroy the dispersing tool.
It is important that the device stands up on a horizontal and firm subsurface to avoid
vibrations.
Make sure that the device can not slip away.
To avoid heat congestion or fires make sure that there is enough space for air circulations.
Avoid direct solar radiation.
