WisyCom MTP40, User Manual, Page: 9 / 20

MTP40 Lite User Manual
Rev.02
9
The following table sums up which parameters can be set and the related range settings.
MENU PARAMETER MEANING RANGE SETTINGS
TUNING
CH Channel 0 ÷ 59
GR Group 0 ÷ 39 + SYNC GROUP
Freq Frequency
depends on the MTP40
Lite
Model:
G 470-566
H 542-640
I 566-686
L 678-798
K 520-640
AUDIO
AF In Gain
Gain of the
audio signal depends on the mic mode setting
(ex. -40dB ÷ 40dB step of 1 dB)
High Pass Filter High Pass filter Flat/60/80/120/170/250/400 Hz
MIC
Mode MIC type
’2 wires’
‘2 wires + bias’
‘3 wires’
‘2 wires & phantom’
‘2 wires + bias & phantom’
Phase
Audio signal
phase
0° or 180°
PTT Mode
It defines how
and what
information the
transmitter has
to send
Disable :when the PTT button is pushed, nothing
happen. (the transmitter sends AF+Tone
squelch)
Normal : when the PTT button is pushed, the
transmitter send a different RF signal. According
to the receiver configuration the audio can be
enabled/disable on LINE (and/or COM).
Muting : the transmitter doesn’t send the audio.
The voice is cut, it doesn’t enter to the
microphone
No Data : the transmitter sends neither tone
squelch nor battery data.
RF POWER RF Power RF Power
High (50 mW ERP) or
Low (10 mW ERP)
NOISE RED. NRSYS Noise reduction
ENR: Wisycom Extended-NR,noise optimized
ENC: Wisycom Extended-NC,voice optimized
OTHERS
Led Light
Power switch
green
brightness
0 ÷ 16
Led Mode
It defines when
the power
switch led (see
Fig. 3) has to
become RED
None: never
ModPeak: when audio get close to saturation
PTT: when the PTT button is pushed
Battery Battery type Alkaline or NiMH