
MTP40 Lite User Manual
Rev.02
8
<NOISE RED> menu
This menu can be entered by scrolling selector.
MTP40
Lite
supports 2 different type of “Companding
systems”
ENR
: designed for maximum noise reduction
ENC:
designed for maximum audio fidelity (use this in
case of special vocal application or to remote
instruments)
<OTHERS> menu
This menu can be entered by scrolling selector.
Power switch green LED brightness can be setup
LED
light. Modulation peak LED on power switch (become
RED when audio get close to saturation) can be
enabled/disabled.
Battery type can be setup in Alkaline or NiMH.
<IRDA> menu
This menu can be entered by scrolling selector.
While is this menu MIC can be connected to IRDA for
setup or firmware upgrades.
NOTE: while in this menu display is not automatically
turned off.
<LOCK> menu
This menu can be entered by scrolling selector.
Long pressing (2 sec.) selector button (
click
) it locks
MTP40
Lite
in transmission mode.
To unlock, long pressing (2 sec.) selector button again.
<BOOTLOAD> menu
This menu can be entered only turning on the transmitter while pushing
at the same time
both
quick channel setup buttons (<
ch
> &
<gain>
).
Device is forced in bootloader mode to allow
FIRMWARE
UPDATE
.