Wistron NeWeb DNMA-91, User Manual

Page: 24 / 39

23
“Auto”. “Auto” allows the use of either, 802.11g or 802.11b mode.
NOTE! Ad-hoc mode is available only for 802.11b/g.
Ad Hoc Net Start: Specifies a band to establish an Ad Hoc network if no
matching SSID is found. Options available are the following: 802.11b and
802.11g.
NOTE! Ad-hoc mode is available only for 802.11b/g. This is a client
product and do not have radar detection function specified by FCC. 802.11b
Range: Options are Normal Range and Extended Range. This function
can let user to determine the transfer range in 802.11b mode. Extended
Range can prolong the transfer range with a lower data transmitting rate.
Scan Mode: Options are Active Scan, Passive Scan and Auto. In Active
Scan, the driver sends out the probe request frames from each channel and
collects the response frames from the responding. In Passive Scan, the
driver scan each requested channel, listening the beacons on each channel.
Transmit Power: This setting allows you to change the output power of the
PC Card to increase or decrease the coverage area.
QoS: Disables or enables the PC Card to cooperate in a network using QoS
(Quality of Service).
2.4 GHz Preamble: Allows Ad-Hoc compatibility with other 2.4 GHz
devices. Two options are Short and Long and Long only. Use Long Only
when configuring the client for an 802.11b RoamAbout AP wireless
network.
格 格 格 格式化 式化 式化 式化:::: 項目符號及編號