Wistec BT-323-EE, User Manual

Page: 41 / 60

IP Phone User Manual (V1.32)
41
Set how IP phone gets relevant network parameters. X ranged
from 0 through 3: 0: authorize users set IP address, subnet mask
and router IP address of IP phone manually; 1: use DHCP mode.
With this system, your LAN or router automatically assigns all the
required network parameters to any device connected to it when
the device log on. IP phone is shipped from the factory with
DHCP on. So, if your LAN or router is configured to use DHCP
addressing, the IP phone’s LAN parameters will automatically be
configured as soon as it is connected to the LAN or router and
powered up; 2: use PPPoE mode. Those ADSL and Cable Modem
users please select this item for it is a protocol especially designed
for them. With this system, ADSL ISP automatically assigns all the
required IP parameters to any device connected to it when the
device log on; 3: use modem mode. Those who use IP phone with
modem, please set the value as 3.
set pppid XXX
With iptype set as 2, use this command to set ADSL ID; with iptype
set as 3, use this command to set Modem ID.
set ppppin XXX
With iptype set as 2, use this command to set ADSL pin; with
iptype set as 3, use this command to set Modem pin.
set ip XXX.XXX.XXX.XXX