- 8 -
8 Simple Trouble shooting
Problem
Possible reasons
Trouble shooting
Top speed too
slow
1. Low battery voltage
2. Damage to motor driveline
1. Recharge battery fully
2. Call service
Power on but
motor not working
1. Battery not connected position
2. Fused
3. Motor connection damaged
1. Re install battery
2. Replace fuse
3. Call service
Driving shorter
distance per
recharge
1. Tyre pressure too low
2. Undercharge or charger fault
3. Battery capacity loss or
damage
1. Check pressures
2. Recharge completely or
have charger inspected
3. Replace battery
Part 2 Controls and Equipment
In this section we will describe the functions and any specific maintenance needed on all
the main controls and ancillary equipment.
9 Battery on off and battery lock
9.1
Your Wisper bike has 1 key. This key is for locking
the battery into the bike. Please keep a careful
note of the key number as we cannot replace it
without this number should it become mislaid.
9.2
The battery is connected to the electrical system
on the bike automatically when you push the
battery into the rear carrier housing. To turn on
the bikes electrical system, switch the on/off
button in the battery box to on, to turn off the bikes electrical system, switch
the on/off button in the battery box to off. (Please refer to the picture)
9.3
After the battery has been turned on the bike is ready for use. The battery box
capacity indicator is on the handle bar for ease of use. Assistance from the
battery is then available.
