17.1
Your Wisper bike has been fitted with a quick release saddle post collar to
facilitate the movement of the saddle to remove the battery or to change
the riding position.
17.2
It is important that the nut on the collar is tightened so the post will not
move in the bike tube. Make this adjustment with the quick release lever
in the open position.
17.3
Adjust the seat to the correct height and close the lever. When you sit on
the saddle there should be no vertical movement at all in the saddle post.
18Saddle post suspension
18.1
For your comfort your bike has been fitted with saddle post suspension it
has
been set for a person weighing 75kg. If you are lighter than this you may
not
,feel any benefit and if you are heavier you may feel the suspension
bottoming out.
18.2
The suspension post can be adjusted by removing the whole post with
saddle attached from the bike. On the bottom of the post you will find an
alan key adjuster simply turn it clockwise to tension the spring for heavier
people and anticlockwise to release tension for lighter people.
IMPORTANT never raise the saddle past the point where the maximum marks on
the
saddle post are visible above the quick release collar and never grease the post
19 Rims and spokes
19.1
It is essential to get your spokes checked and tightened after 300 miles.
This is a free service provided by your supplier. If this service has not been
undertaken at the correct time this may cause damage to the wheels and
spokes that will not covered under our guarantee.
20Chain and drive wheel
20.1
The chain and drive wheel are made from rust proof materials.
20.2
Lightly oil with bicycle chain oil the chain at least once a month.
20.2
Because your bike has a rear derailleur the chain will be automatically
adjusted.
21Derailleur
- 15 -
Summary of Contents for 705se
Page 5: ......
