background image

50100935001_SKS-575(Ver2)Rev.02112012E

 

About these instructions 

 3 

1. About these instructions 

1.1  Symbols and guidance signs in these instructions 

 

Danger! 

There is a risk to life and limb if the warning is not followed.   

 
 

 

Risk of electric shock! 

There is a risk to life and limb from electricity if the 

warning is not followed.  

 
 

Use disposable gloves!

 Use disposable gloves for the following work to protect 

the material or your health.  

 
 

Attention! 

There is a risk to the environment and the device if the warning is not 

followed. 

 
 

Operating steps

, that should take place in a certain order, are numbered 

sequentially. 
 

Operating steps

, that only consist of one step or that don’t have to be followed 

in a certain sequence, are marked with a point. 

 

Feedback

 from executed actions begins with an arrow. 

 

Enumerations

 begin with an enumeration line. 

 

1.2  Who are these instructions for? 

These instructions are intended for the personnel, that are assigned with the assembly, 
operation and maintenance of the searchlight.  

 

Risk of electric shock! 

All electrical installation and repair work may only be 

carried out by a qualified electrician! 

        1, 2, 3, …  

Summary of Contents for SKS 575

























Reviews: