background image

HML-ISO_35_ Rev01122009_E.doc

 

 

 

1.    

About these instructions 

1.1  Symbols and guidance signs in these instructions 

 

Danger! 

There is a risk to life and limb if the warning is not followed.  

 
 

Risk of electric shock! 

There is a risk to life and limb from electricity if the warning  

is not followed.  

 
 

Attention! 

There is a risk to the environment and the device if the warning is not  

followed.  

 
 

Use disposable gloves!

 Use disposable gloves for the following work to protect the  

material or your health. 

 
 

Operating steps

, that should take place in a certain order, are numbered  

sequentially. 

 

Operating steps

, that only consist of one step or that do not have to be followed in a  

certain sequence, are marked with a point. 

 

Feedback

 from executed actions begins with an arrow. 

 

Enumerations

 begin with an enumeration line. 

 
 

1.2  Who are these instructions for? 

These instructions are intended for the personnel, that are assigned with the assembly or operation 
and maintenance of a WISKA searchlight Type HML-ISO 35 or one of its versions.  

 

Risk of electric shock! 

All electrical installation and repair work may only be carried out by 

a qualified electrician!  

 

 

        1, 2, 3, …  

About these instructions 

Summary of Contents for HML - ISO 35

















Reviews: