When returning from a
Power Outage, Lights go
back to ON state.
This is normal operation. Our device has a
fail-safe feature forcing the device to go to
50% or 100% at the full output on the loss of
power. Alternatively, the device will return to its
previous state after the power is restored, as
configured using the Lumos Controls mobile
app.
Commissioning
Once powered up, the device will be in ready to be commissioned via the Lumos Controls mobile app,
available for free download on
To begin commissioning, click the ‘+’ icon from the top
of the ‘Devices’ tab. The app allows you to preset certain configurations which will be loaded after the
device is added. The pre-configurations made using 'Commissioning Settings' will be sent to the devices
being commissioned. Once commissioned, the device will be displayed in the ‘Devices’ tab and you can
perform individual operations like ON/OFF/dimming on it from this tab.
Please visit
Troubleshooting
Device doesn't operate
immediately after power ON
Check whether you have set up a
transition time
Lights flickering
The connection is not appropriate
The wires are not secured firmly with
connectors
Lights did not turn ON
Circuit breaker tripped
Fuse has blown
Inappropriate wiring
All Rights Reserved WiSilica Inc
www.lumoscontrols.com
23282 Mill creek Dr #340
Laguna Hills, CA 92653 USA
+1 949-397-9330
Warranty
5-year limited warranty
Please find warranty
Note: Specifications may change without notice
Actual performance can vary due to end-user environment and application
Application
Ver 1.0 Mar 2022
WCA2CSD4N
Radiar ARD4
