MENUES AND SETTINGS
11
Select the actual Input parameters for the QAM signal you
receive.After the tuner has locked you can read the values
for [Locked], [Level] and [C/N].
[Level] shall show a green bar to be correct. If the bar
is Orange or Red the input level is out of recommended
window (too low or too high).
If you have an MyM Pro MICRON 6 proceed with next two
tuners [Tuner 3] and [Tuner 4] after moving the TP cable to
the other RJ 45 port (if not using switch). Tuner 3 provides
the service list for RF output 4 and 5. Tuner 4 provides the
service list for RF output 6.
5.2.4 IPTV RECEPTION
For receiving from IPTV, start with chosing IPTV as [Input
source].With this Input the Source duplication is ON, and
only CI 1 is used for decryption of 1 MPTS input or 3 SPTS’s
input.
Select the actual Input parameters for the IPTV signal you receive. You can receive either one MPTS or
three SPTS’s. After saving, you can see information of the received IPTV signal(s).
Decryption of SPTS’s
is only working if
only one CAT is used.
Summary of Contents for MICRON MyM Pro
Page 1: ...MyM Pro MICRON Installation Guide www wisi se...
Page 23: ......
