MENUES AND SETTINGS
10
5.2.2 DVB-S/S2 RECEPTION
For receiving from satellite, start with chosing Tuner
DVB-S/S2 as [Input source].Tuner 1 provides the service list
for RF output Ch1 and Ch2. Tuner 2 provides the service
list for RF output Ch3 when Source duplication is chosen
as OFF.
Select the actual Input parameters for the satellite
transponder you receive.After the tuner has locked you
can read the values for [Locked], [Level] and [C/N].
[Level] shall show a green bar to be correct. If the bar
is Orange or Red the input level is out of recommended
window (too low or too high).
If you have an MyM Pro MICRON 6 proceed with next two
tuners [Tuner 3] and [Tuner 4] after moving the TP cable to
the other RJ 45 port (if not using switch). Tuner 3 provides
the service list for RF output 4 and 5. Tuner 4 provides the
service list for RF output 6.
5.2.3 DVB-C RECEPTION
For receiving from cable, start with choosing Tuner DVB-C
as [Input source].Tuner 1 provides the service list for RF
output Ch1 and Ch2. Tuner 2 provides the service list for
RF output Ch3 when Source duplication is chosen as OFF.
With source duplication
ON, only Tuner 1 is in use.
With source duplication
ON, only Tuner 1 is in use.
Summary of Contents for MICRON MyM Pro
Page 1: ...MyM Pro MICRON Installation Guide www wisi se...
Page 23: ......
