Wishbone Jumbo / Wheelchair Outhouse Assembly Guide
10
On the front, slide in the plastic lumber from the top in the same way
with groove down, tongue up, and textured side out. Remove the
aluminum angle and install the plastic lumber on the door last. Note decal
board position.
11
Re-install the aluminum angle back above the top board on the door.
10
Remove aluminum
angle before
installing plastic
lumber
Front side boards (26)
12
½
”
Re-install aluminum angle to
hold door boards in place
Decal
board should be 3
rd
from
the top with decal on inside
Inside
Front door boards (26) 31
9
/
16
”
