WISEUP SHOP IDC100, User Manual

Page: 4 / 27

I. Product Overview
1.Camera Lens
2.Microphone
3.USB Port
4.Red Indicator Light
5.Blue Indicator Light
6.Power/Video Recording Button
7.Reset Button
8.Camera/Audio Recording Button
II. What’s in the Box
-1× Spy Camera ID Card
-1× USB Cable
-1× Lanyard
-1× Clip
III. Operation
>> Please make sure your camera battery is fully recharged before using.
>> Please format the built-in memory card on your PC computer before using.
3.1. POWER ON/OFF
3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both
the red and blue indicator lights will be illuminated, then the red one will be off
while the blue one will stay illuminated, indicating the camera has entered into
standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again.
The blue indicator light will be off, then the red indicator light will flash twice and
turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any
operation more than 1 minute.
3.2. VIDEO RECORDING
3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both
the red and blue indicator lights will be illuminated, then the red one will be off
while the blue one will stay illuminated, indicating the camera has entered into
standby mode automatically.
3.2.2. Press the Video Recording Button once to record video. The blue indicator
light will flash 3 times and then turn off.
3.2.3. Press the Video Recording Button once to stop recording video. The blue
indicator light will stay illuminated, indicating the camera is back to standby
mode.
[Note]:
1). A video file will be generated and saved every 30 minutes automatically.
2). The camera can record video for 3 hours continuously on a full charge.
3). Video Resolution: 1280x960 Video Format: AVI
4). If the camera is in low battery, the red indicator lights will flash 4 times and the camera
will shut down automatically, and the camera will save all the video files.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. Both
the red and blue indicator lights will be illuminated, then the red one will be off
while the blue one will stay illuminated, indicating the camera has entered into
standby mode automatically.
3.3.2. Press the Camera Button once to take a photo. The red indicator light will
flash once and turn off every time you take a photo.
3.4. AUDIO RECORDING
3.4.1. Power on the camera by pressing the Power Button for 2 seconds. Both
the red and blue indicator lights will be illuminated, then the red one will be off
while the blue one will stay illuminated, indicating the camera has entered into
standby mode automatically.
3.4.2. Press the Audio Recording Button for 2 seconds to record audio. The blue
indicator light will be off, the red one will flash 4 times and then turn off.
3.4.3. Press the Audio Recording Button once to stop recording audio. The blue
indicator light will stay illuminated, indicating the camera is back to standby
mode.
[Note]:
1). An audio file will be generated and saved every 30 minutes automatically.
2). Audio Format: WAV
IV. Video/Image Files Uploads
4.1. Power off the camera and connect the camera to a proper PC computer
USB port by using the USB cable provided.
4.2. Removable disk drive folder appears.
4.3. All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1. Power off the camera and connect the camera to a proper PC computer
USB port by using the USB cable provided.
5.2. Removable disk drive folder appears.
5.3. Click on the drive in the root directory and inside the root directory, create a
file named “time.txt”.
5.4. Write the current date and time in the “time.txt” file with the correct format:
YYYY-MM-DD HH:MM:SS (For example: 2016-04-12 14:24:32). Save this file.
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera and connect the camera to a proper PC computer
USB port by using the USB cable provided.
6.2. The red indicator light will keep flashing while the blue indicator light will be
illuminated during the charging process.
6.3. It will take 3 hours to obtain a full charge.
6.4. When the camera is fully recharged, the red indicator light will be off and the
blue one will stay illuminated.
Tips: you can also use a DC5V phone charger to charge this camera.
VII. Resetting
If, for any reason, the camera stops responding or isn’t working properly, a quick
reset will restore it back to normal operation.
Operation: When the camera is powered on, use a pin to press the Reset Button
once and the camera will shut down automatically. Then you can restart the
camera to the factory default settings.