4
XRN-6410B2/XRN-3210B2
1
Remove the screws from the top and back sides
of the recorder, and push the cover back to
release it.
2
Remove the screws from the left/right sides and
release the bracket.
3
Mount 8 hard disks into the bracket, and fix it
using screws.
4
Fix the hard-disk-mounted bracket to the recorder
using screws.
5
Connect the SATA/power cable of the hard disk to
the connector of the main board.
■
Refer to the figure below for the hard disk location number and
connector number.
6
Make sure that there is no problem in the
connection port and routing inside the recorder,
and then fix it using screws after closing the cover.
■
When closing the cover, be careful not to damage the cable.
Summary of Contents for XRN-3210B2
Page 15: ......