using speaker mode
36_
using speaker mode
using speaker mode
If you select <
Operation Mode
> to <
Speaker
> in the speaker’s <
Device Operation Setting
>, you can perform
scheduled broadcasting, BGM and TTS broadcasting using the speaker alone. Also, because it is set up as
device register and source (audio input device), zone (audio output device) in the <
Controller
> mode speaker or
server (SPA-S1000), it can perform several broadcast operations.
HOME SCREEN CONFIGURATION
You can move to the website that supports functions below by selecting <
Speaker
> for the <
Operation Mode
>
of the Speaker.
a
c
b
d
f
g
e
Name
Function Description
a
Home
Goes to the Home screen.
Operation Setting
Various operations are available, such as Contact, Broadcast, Annual Scheduling, and SIP.
Maintenance
Logs generated in the product can be checked.
Environment Setting
The System Management, Network, Time, Device Information, etc. can be set.
b
Product Model Name
Displays the device's model name.
c
Product Information
The IP address, product name, product location, and firmware version are displayed.
d
Connected Account/Login
Shows a connected account and its login status.
e
Time Information
The connection time to the web page menu, product cumulative operating time, and product time
will be displayed.
f
Language
Shows language options supported on the website. (Korean, English supported)
g
Go to the Official Website
If you click <
Hanwha
>, the screen will move to the Hanwha Techwin Official Website.
M
`
The optimal monitor resolution is 1920x1080.
OPERATION SETTINGS
You can set up the CP function, broadcast audio (BGM, TTS, CHIME), DSP (speaker, built-in microphone volume),
scheduled broadcast and SIP (VoIP phone voice transmission).
Contact Closure Settings
1.
On the Home screen, click <
Operation Setting
>
;
<
Contact Closure Setting
>.
2.
If you select the <
Contact Closure Input
> and <
Contact Closure Output
> tab, the status information
will be displayed.
-
: When the input or output device is running,
-
: When the input or output device is not running,
3.
For Contact Closure Input, a real input signal has to occur to change the status information.
Whether the Contact Closure Output is operating or not can be checked manually by clicking its status
information on the screen.
Contact Closure Input
~
By connecting to the Contact Closure Output of an
external device, such as an electrical switch, smoke
detector, or motion detector, it can be used as the
Contact Closure Input of the speaker.
- You can perform a warning broadcast through
the speaker when detecting a motion by
connecting the motion detector to the contact
closure signal.
~
When the contact closure signal is entered,
the BGM audio, which is set up in the “Event &
Preset” function in advance, will be automatically
broadcasted.
Contact Closure Output
~
A Contact Closure Output can send signals to the
broadcast system or send a warning signal to an
external device, such as a lightbar, by connecting to
it.
~
You can output the command for the contact
closure of speakers by simply pressing the CP
buttons on <
Button Mode
>
;
<
Event & Preset
>
or the physical CP buttons on the microphone
(SPA-M1000).
M
`
You cannot use contact closure input with a speaker by itself.
For the contact closure settings and operation method, refer to <
Event & Preset
> on pages 30 and 31.
Summary of Contents for SPA-D1000
Page 48: ......
