Wisenet SPA-D1000, User Manual

Page: 34 / 48

using controller mode
34_
using controller mode
~
TTS: Enter sentences with the language to be used in the < Text for TTS > and select the language and
gender in Select Speaker.
- Select language: English (US, GB), German, Spanish, French, and Russian are supported.
- Select gender: You can select a male or female voice.
- TTS input language and the language the speaker has chosen should be the same to play TTS-
converted audio normally.
If they are not the same, there will be a pop-up window that says <
A TTS conversion error has
occurred. Please check the contents.
>
- When you enter a special character, please refer to the following content.
` In the TTS input window, you cannot enter & or ` .
`
You can enter ^ ( ) _ | ‘ “ , but they are not converted to audio.
` If @ # $ % = \ / * are located alone or in the middle of sentence or numbers, they will be converted to audio.
` Depending on the supported language or sentence structure, a special character may not be converted to audio.
7. ETC.: You can set other schedule settings.
~ Priority: A lower number has a higher priority. If the priority is “1000”, it will be on air prior to any other
broadcasts.
As the priority of a general audio broadcast is set to 3000 by default, the priority of the annual
scheduler is recommended to be set at a value lower than 3000. (The initial value is 3000, the
input value is 1000 - 9999)
M
`
While broadcasting with a source speaker that has a source priority set as "2000" in < Button Mode >, if the schedule
time that a schedule priority is set as "1000" in the <
Annual Scheduler
> occurs, the <
Button Mode
> broadcast will
stop and the schedule setting broadcast will start. Conversely, if the schedule priority in < Annual Scheduler > is "3000",
the < Button Mode > broadcast will continue.
`
During broadcasting, an event that has an event priority set as "2000" in the < Event & Preset >, if the schedule time for
a schedule that has a priority set as "1000" in the < Annual Scheduler > comes up, the < Event & Preset > broadcast
will stop and the schedule setting broadcast will start. Conversely, if the schedule priority in < Annual Scheduler > is
"3000", the <
Event & Preset
> broadcast will be kept.
~ Volume: You can set the volume when the schedule is operated. (Initial value 70, input value 0~100)
Output volume is reflected only to < Annual Scheduler >.
~ Date Format: You can select the date format displayed on the scheduler.
~ Title Color: You can select the color displayed on the scheduler.
Holiday Setup Event
Click the [ Holiday ] button on the scheduler settings screen
and the <Holiday> screen will appear.
~ Add Holiday : You can set holidays in < Add Holiday >.
~ Download : You can download the created holiday settings
as an XML file.
~
Upload: You can upload the downloaded holiday settings files.
Add Holiday screen.
1. Click the [ Add Holiday ] button and the < Add Holiday >
screen will appear.
2. Enter the holiday title to be set.
3. Set up the date and time to start and end the broadcast.
4. < Activation > must be checked to operate the holiday
settings.
5. Click the [ Add Holiday ] button when the setting is
complete.
6. Set holiday settings are displayed on the scheduler.
7. You can change or delete set holidays.
M ` If you set the date and time to start as 2021-01-01, 08:00 and
the date and time to end as 2021-01-02, 23:00, the scheduled
broadcast will be suspended from 8:00 on January 1st to 23:00
on January 2nd.