10_
installation
installation
INSTALLING WALL MOUNT PARTS
Installing Wall Mount Kits
The wall mount kit (sold separately) allows you to hang the product on a wall.
For more information on wall mounting, refer to the owner's manual supplied with the wall mount parts. When
installing the wall mount, seek the help of a technician.
Hanwha Techwin is not responsible for any damage to the product or injury to the user or others caused by any
accident due to a user's attempt to install the product.
Wall Mount Kit Specifications (VESA)
J
`
Install the wall mount kit on a solid wall perpendicular to the floor.
`
Please refer to the nearest store when installing on other materials.
`
Installing on an inclined wall may cause the product to fall, which can result in
serious injury.
`
When using a VESA mount, select a product that can hold 4 times the weight of
the monitor.
~
When you purchase our wall mount kit, you will find a detailed installation guide and all parts required for
assembly.
~
Do not use screws that are longer than the standard dimensions or that do not conform to the VESA
standard screw specifications. Using screws that are too long may damage the inside of the product.
~
For wall mount parts that do not conform to the VESA standard screw specifications, the screw length may
vary depending on the wall mount specifications.
~
Do not over-tighten the screws. The product may be damaged, or may fall, resulting in injury.
Hanwha Techwin is not responsible for any damage to the product or injury to the user or others caused by
any accident due to a user's attempt to install the product.
~
Hanwha Techwin is not responsible for damage to the product or injury to the user caused by using non-
compliant or non-VESA wall mount parts, or by the customer not following the product installation
instructions.
~
When hanging on a wall, two people should always lift the product.
~
The standard dimensions of the wall mount kit are shown in the table below. [Unit: mm]
Model name
VESA dimensions (A * B)
Standard screws
Quantity
SMT-2212
100 × 100
M4/L8
4
J
`
Do not install the wall mount kit with the product turned on. This may lead to injury due to electric shock.
For detaching the stand,
1.
Press the button behind the monitor to detach the stand
from the monitor.
2.
Push the fixing hook on the stand base to detach the neck from
the stand base.