30_ camera operation
camera operation
- FONT COLOR : You can change the OSD font color.
(WHITE, YELLOW, GREEN, RED, BLUE)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y
COAX :
You can select whether to use COAX communication.
y
IMAGE ADJ
❶
If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates ‘IMAGE ADJ’.
❷
Select a desired mode using the Function Setup switch.
- GAMMA : The setting range is 0.35~
1.0. The closer to 1.0 the
setting is, the darker
it gets.
- PED LEVEL : The setting range is
1 ~ 100. The closer
to 100 the setting
is, the higher the
PED level gets.
- COLOR GAIN : The setting range
is 1 ~ 100. The smaller the setting value is the smaller the color
gain gets and the more color blind it gets.
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness.
Increase or decrease the level of each mode to adjust the level of
sharpness.
y
OFF : Released state
y
ON : The setting range is 1 ~ 32.
- RETURN : Return to the SPECIAL menu.
M
`
When the V-REV or H-REV mode is enabled, the text on the screen does not
flip.
`
If you increase the SHARPNESS level too high, the picture may become
distorted or noise may appear.
`
If you turn off COAX while operating the camera menu from your DVR,
note that you will not be able to make further operations.
IMAGE SETUP
1.
GAMMA
USER
2.
PED LEVEL
I
IIIIIIIIIIIIIIIIIIII
5
3.
COLOR GAIN
IIIIIIIIIII
I
IIIIIIIII
55
4. H-REV
OFF
5. V-REV
OFF
6. SHARPNESS
ON
7.
RETURN
Summary of Contents for SCD-6025R
Page 1: ...High Resolution Camera User Manual SCD 6025R SCO 6025R ...
Page 36: ......