QSG_SWT-G0803MG
08/12/2019
PAGE 4
QUICK START GUIDE
SWT-G0803MG SERIES
Safety Information
»
Only service personnel can service the equipment. Please contact Technical Support.
»
The equipment should be installed in locations with controlled access, or other means of
security, and controlled by persons of authority. When operating at temperatures above 51º C, the
equipment surfaces will be hot to the touch. Installation in restricted access location is required
for this case.
»
For POE models requiring a power supply not labeled LPS, the unit should be installed in a
restricted access location using a 60950-1, 2nd E Am. 1 + Am. 2 Certified power supply
rated for the ambient temperature in which it is installed. Total derated power rating should be
greater than the sum of the attached loads plus 15 W for the switch.
»
Use CDRH compliant SFP modules when using fiber connectivity with this device.
»
When used in Australia or New Zealand, the product is certified for intra building applications
only, and should not be directly connected to network cables with outside plant routing.