26_
camera operation
camera operation
- DWELL TIME : Use the left or right button in the ‘DWELL TIME’ item to
select a time between 5 and 60 seconds for the dwell time
before the zoom is returned to the ‘START ZOOM’ position.
(5,7,10,15,20,30,40,60 sec)
y
SETUP CONFIG
- DETECT AREA : Defines the Motion
Detection area.
y
AREA SEL: You can select up to 4
areas.
y
MODE : Determines whether to
use the area selected in the AREA.
y
DETECT ALARM : Determines
whether to use the detect alarm
selected in the AREA.
y
TOP / BOTTOM / LEFT / RIGHT :
Adjust the size and position of the
selected area.
y
RETURN : Select this to save the
DETECT AREA menu settings
and return to the SETUP CONFIG
menu.
- MASK AREA : Specify a detection
exception area to mask. Select a
mask area number and specify the
size and position.
y
AREA : You can select up to 4
areas.
y
MODE : Determines whether to
use the area selected in the AREA.
y
TOP/ BOTTOM/LEFT/ RIGHT :
Adjust the size and position of the
selected area.
- SENSITIVITY : Set the sensitivity of the motion detection. When you
adjust the lower level, the more sensitive.
- DET. SIZE : Selects an object size to detect on the screen. When you
adjust higher levels, the more larger size.
-
RETURN : Return to the INTELLIGENCE menu.
SETUP CONFIG
DETECT AREA
MASK AREA
SENSITIVITY 3
DET. SIZE
RETURN
DETECT AREA
AREA SEL
AREA 1
MODE ON
DETECT ALARM
ON
TOP
IIIIIIIIIIIIIIIIIIIIIIII
0
BOTTOM
IIIIIIIIIIIIIIIIIIIIIIII
1080
LEFT
IIIIIIIIIIIIIIIIIIIIIIII
0
RIGHT
IIIIIIIIIIIIIIIIIIIIIIII
1920
RETURN
MASK AREA
AREA
AREA 1
MODE ON
TOP
III
IIIIIIIIIIIIIIIIIIIII
128
BOTTOM
IIIIIIIIII
IIIIIIIIIIIIII
416
LEFT
IIIIIIIIIIIIIIIIIIIIIIII
128
RIGHT
IIIIIIIIII
IIIIIIIIIIIIII
704
RETURN
