78_
setup
setup
alarm sETTing
alarm Enable
z
on/off :
Enables or disables the Alarm function.
alarm input
z
moD
Enables selecting an Alarm Input method.
- NO (Normally Open)
IN 1.2.3.4
IN 1.2.3.4
ALM GND
ALARM ON
ALM GND
ALARM OFF
- NC (Normally Closed)
IN 1.2.3.4
IN 1.2.3.4
ALM GND
ALARM OFF
ALM GND
ALARM ON
M
`
As shown in the picture above, the Alarm Input must be entered with the Open or Closed switch signals. Supplying power
without entering the signals may damage the product.
< Alarm input when N.O. is enabled >
< Alarm input when N.C. is enabled >
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Alarm Setting
Alarm Enable
OFF
Alarm Input
Alarm/AUX Output
MD Dwell Time
OFF
ALM Dwell Time HOLD
ALM MOD P SEQ. NO
IN1 OFF 1 OFF
IN2 OFF 2 OFF
IN3 OFF 3 OFF
IN4 OFF 4 OFF
M
`
When selecting the Camera Name and Preset Name, the screen displays the Left
keypad.
`
Names can be up to 12 characters and can be entered via the joystick and the Enter
key. Once a name is entered, use the joystick and the Enter key to perform the Set
command and save the name.
XXX Name [ ]
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1234567890 ( )
[ ]-/
T
!?,.
BACK SPACE CLR SET