English
- 31
●
connection & inst
alla
tion
PrEParing aDaPTEr anD CablEs
y
Power adapter
Power adapter has the capacity of AC24V 2.5A(HCP-6230) / AC24V 3A.(HCP-6230H)
M
`
After connecting the power cable by separating the power connector from the terminal, make the connection between
terminal and connector by using a bolt.
y
video Cable
The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below :
If the distance between the camera and the monitor exceeds the recommended maximum, please use
an auxiliary video amp.
M
`
If the camera is controlled through coaxial communication, please use a video amp intended for coaxial communications.
Regular video amps do not transfer coaxial signals.
y
Communications Cable
For the camera to communicate with the controller, a RS-
485/422 communications line is required. To ensure the quality
of long distance communication and the accuracy of the overall
communication it is recommended using a twisted pair cable
such as UTP.
M
`
Depending on the camera’s environment, the communications distance may vary.
`
Neither the video nor communications cable is enclosed with the camera.
Distance
recommended Cable
specification
300m
3C2V
500m
5C2V
IN1 IN2
GN
D IN
3 IN4
GN
D 1.CO
M 1.NO 1.NC
2.CO
M 2.NO
2.NC
<Camera Wiring Interface Board>
