32_ camera operation
Camera operation
y
MOTION :
This product generates signals each
time an object movement is detected
in the 4 areas of the screen so efficient
monitoring can be achieved.
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘MOTION’.
➋
Select a desired mode using the Function Setup switch.
y
DET. AREA : Set the areas of
motion detection.
`
SEL AREA : Select from four areas
that users want.
`
MODE : Determine whether to
use the selected area.
`
MASK : Under Motion
Detection, If you don’t
want to see mosaic
image on the screen,
you may turn MASK OFF.
If you wants to see
mosaic image, please turn it on.
`
TRANSPARENCY: Adds or removes transparency from the masking area.
`
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
`
RETURN : Return to the MOTION DET menu.
y
ALARM OUT : When object movement is detected, the detection signal will be
outputted.
`
OSD : Display signals on the screen.
`
RETURN : Return to the MOTION DET menu.
y
SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the
higher level, the more sensitive.
y
RETURN : Return to the SPECIAL SETUP menu.
MOTION DET
▶
DET. AREA
ALARM OuT
SENSITIVITY
IIIIIIIIII
I
IIIIIIIIII
5
RETuRN
DETECT AREA
▶
SEL
AREA
AREA
1
MODE
ON
MASK
ON
TRANSPARENCY
0.00
TOP
I
IIIIIIIIIIIIIIIIIIII
1
bOTTOM
IIIIIIIIIIIIIIIIIIII
I
34
LEFT
I
IIIIIIIIIIIIIIIIIIII
1
RIGHT
IIIIIIIIIIIIIIIIIIII
I
61
RETuRN
