34
need, release the memory space.
4. Configuration and firmware mismatching
Reasons:
After firmware updating, not download the configuration and file to match with this firmware.
Solving method:
a) Open the installation catalogue of application procedure, operate version testing procedure, check if the function
library match with firmware version, if not match, please contact with the supplier to get a matching function library.
b) Double-click application procedure, download configuration.
5. The error of function baseband firm ware mismatching
Reason for this error
：
The function base for making processing file mismatch with firm ware.
Solving method
：
The version number of controller for movement is not visible for change, unless to upgrade this controller via “firm
ware loading”.
6. Hardware and firm ware mismatching
Reason for this error
：
After upgrading of the firm ware, hard ware doesn’t support the new one.
Solving method
：
a) Please copy the new firmware file (FM.FMW and 05LM201.HDW two files) to the root directory of U-disk
(formatted as FAT16, we propose that U disk do not have any other files)
b) Break off the power of MPC6515/35, insert U disk and then connect power for MPC6515/35, the light D1 on
MPC6515/CPU main board flash 2 times fast and D1 is always on (usually 2 to 5 seconds, depending on the
firmware), firmware is being updated at this time; if U disk with lights, following the instructions of U disk to
observe whether it is reading data via the flashing light, 6535 plate could be judged by observing light on U disk;
c) D1 on MPC6515 main board flashing quickly, indicating the updating of the firmware finished ; if U disk with
lights, follow the instructions to observe whether the reading of the data finished via flashing lights, It is about 15
seconds;
d) Extract U-disk, MPC6515/35 will normally start DSP firmware program. If MPC6535 can not work normally
when U-disk extracted, maybe a firmware need to be updated. So repeat the steps to update the firmware. If
MPC6515/35 still can not work normally, contact distributor.
