MACTek BULLET™ – User Manual
DM1101010UAB
Copyright 2009-2010
21 of 33
ALERT – HART Devices Count Exceeded
Description:
A HART Master has been detected that is configured as the same Master type as the
Bullet. This will prevent the Bullet from communicating with connected Sub-Devices
while the other HART master is present.
Corrective Action:
If there is another HART Master present, ensure that it and the Bullet are configured for
different HART Master types. When using a HART Handheld, ensure that it is not set for
the same Master Type as the Bullet.
Timestamps:
Start: Set the first time that too many HART devices were detected
Stop: Same as the start time
ALERT – HART Sub-Device Lost
Description:
A Sub-device connected to the Bullet has stopped communicating and has been
dropped from the sub-device list.
Corrective Action:
If the Sub-device was removed intentionally, clear the alert. Else, check the connection /
power to the sub-device and verify communications with a wired-HART handheld or PC.
Timestamps:
Start: Set when the sub-device was lost
Stop: Same as the start time
ALERT – Burst Packets are Being Dropped
Description:
One or more burst packets have been dropped from the Bullet to the WirelessHART
Network.
Corrective Action:
Check to ensure that the WirelessHART Network has granted the requested bandwidth
for the burst settings. If not, either adjust the WirelessHART network settings or adjust
the burst times for the Bullet.
