29
Important Safety and Handling Information
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to X10DR or other property. Read all safety instructions for any products and accessories
before using with X10DR. WCL is not responsible for the operation of, or any damage caused by,
third-party accessories or their compliance with safety and regulatory standards.
Keep the X10DR Secure Mic antenna at least 25mm away from your head at all times�
To avoid injury, read all operating instructions and the following safety information before using X10DR. For downloadable versions of
the latest X10DR User Guide, visit: www.x10dr.com
Radio Frequency Interference:
Radio frequency emissions from electronic equipment can negatively affect the operation of other electronic equipment, causing
them to malfunction. Although X10DR is designed, tested and manufactured to comply with regulations governing radio frequency
emission in countries such as the United States, Canada, the European Union, and Japan, the wireless transmitters and electrical
circuits in the X10DR may cause interference in other electronic equipment. Therefore, please take the following precautions:
i/Aircraft: Use of X10DR may be prohibited while travelling in aircraft.
ii/Vehicles: radio frequency emissions from X10DR may affect electronic systems in motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
iii/Pacemakers: The Health Industry Manufacturers Association recommends that a minimum separation of 15 cm (6 inches) be
maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. Persons
with pacemakers:
•
Should always keep X10DR more than 15 cm (6 inches) from the pacemaker when turned on.
•
Should not carry X10DR in a breast pocket.
•
Should use the ear opposite the pacemaker to minimize the potential
•
for interference If you have any reason to suspect that interference is taking place, turn X10DR off immediately.
•
X10DR may interfere with some hearing aids. If you experience interference, consult the hearing aid manufacturer or
your physician for alternatives or remedies.
v/ Other Medical Devices: If you use any other personal medical device, consult the device manufacturer or your physician to
determine if it is adequately shielded from radio frequency emissions from X10DR.
vi/Health Care Facilities: Hospitals and health care facilities may use equipment that is particularly sensitive to external radio
frequency emissions. Turn X10DR off when staff or posted signs instruct you to do so.
vii/Blasting Areas and Posted Facilities: To avoid interfering with blasting operations, turn off the X10DR when in a “blasting area” or in
areas posted “Turn off two-way radio.” Obey all signs and instructions.
Exposure to Radio Frequency Energy:
The unit transmits and receives radio frequency (RF) energy through its antennas. The antennas are located at the top edge of
the unit. The Wireless Speaker Microphone is designed and manufactured to comply with the limits for exposure to RF energy set
by international regulatory agencies, including the FCC of the United States, IC of Canada, MIC of Japan, and the Counsel of the
European Union, among others. The unit has been tested and meets the FCC, IC, and European Union RF exposure guidelines for
802.15 operation. To ensure exposure levels remain at or below the maximum safe levels, when carrying the unit ONLY use the Wireless
Speaker Microphone with the manufacturer’s supplied clothing clip or a non-metalic holder that ensures the antenna remains
greater than 25mm (1 inch) from your head and body at all times. An external antenna is connected to the output connector on the
mobile charger. Always keep your body at least 20cm (8”) from the vehicle mounted external antenna.
Potentially Explosive Atmospheres:
Turn off all non-intrinsically safe ( IECEx/ATEX) approved X10DR when in any area with a potentially explosive atmosphere. Do not
charge any X10DR and obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in serious injury
or even death. Areas with a potentially explosive atmosphere are often, but not always, marked clearly. Potential areas may include:
fuelling areas (such as gas stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air contains chemicals or particles (such as grain, dust, or metal
powders); and any other area where you would normally be advised to turn off your vehicle engine.
Battery Replacement:
Do not attempt to replace the rechargeable battery in X10DR yourself. The battery should be replaced only by WCL or an WCL
Authorized Service Provider. The battery should be re-cycled/disposed of thoughtfully.
Antenna Replacement:
Only use the antennas supplied. Use of other antenna types will void type approval.
This radio transmitter (IC:11443A-XH2/XG2) was approved by Industry Canada to operate with the antenna types listed below the
maximum permissible gain and required antenna impedance for each antenna type indicated. Types of antennas is not included in
this list, having a higher gain than the maximum gain indicated this type are strictly prohibited for use with this device.
Cet émetteur radio (identifier le dispositif par numéro de certification ou le numéro de modèle de la catégorie II) a été approuvé par Industrie
Canada pour fonctionner avec les types d’antenne énumérés ci-après le gain maximal autorisé et de l’impédance d’antenne requise pour
chaque type d’antenne indiqué. Types d’antennes ne sont pas inclus dans cette liste, ayant un gain supérieur au gain maximum indiqué
ce type sont strictement interdits pour une utilisation avec cet appareil.
Note: the distance for Head SAR is 25 mm and Body SAR is 0 mm.
Note: la distance pour la tête SAR est de 25 mm et le corps SAR est de 0 mm.
Summary of Contents for X10DR CLASSIC
Page 1: ...User Manual ...
