5
◎
J1 DC Jack for DC Power 6~13 V Input.
◎
J3 (Phone Jack) RS-232 Connect with Computer for POCSAG Data receiver Use Only.
◎
Green color, LED for Paging network signal Indicate.
◎
Red color, LED for Power ON Indicate.
◎
J2 Main connector for multi input/output and power connect with Computer or Relays, also
to Connect with computer to programming.
J2-1 O/1 for Port #1 output to drive to relays.
J2-2 O/2 for Port #2 output to drive to relays.
J2-3 O/3 for Port #3 output to drive to relays.
J2-4 O/4 for Port #4 output to drive to relays.
J2-5 O/5 for Port #5 output to drive to relays.
J2-6 O/6 for Port #6 output to drive to relays.
J2-7, 8,16 for DC power Input DC 6~13 V+.
J2-9, 10 System ground for power V-.
J2-11 Ground for RS-232. (Connect with Computer Pin 5 of RS-232 DB9).
J2-12 TXD for data output. (Connect with Computer Pin 2 of RS-232 DB9).
J2-13 RXD, for data input. (Connect with Computer Pin 3 of RS-232 DB9).
J2-14 TXD (TTL level output)(for option).
J2-15 RXD (TTL level input)(for option).
