12
C. How to programming the Y1707RS/TTL
1).Connect the DC plug and RS-232 plug into Y1707 (or Y1707 Programmer)
2).Connected the RS-232 cable from Y1707 to P/C or N/B
3).Install programming CD software into your P/C or N/B
4) Click [Pager Module programming Kit-y1707V1] to run the Y1707 data
programming process.
Programming Manual of Y1707
1. Frequency
:
This set-up is used for the reference information only: It does not affect any
Technical features contained in the Y1707 unit.
2.
Y1707 Address (Cap Code) Set-Up
:
There are total 6 addresses in this unit with each address range from
:
z
Addr
1
:
set from 0000008 to 2097151. And it must key in 0 digit if disable.
z
Addr
2
:
set from 0000008 to 2097151. And it must key in 0 digit if disable.
z
Addr
3
:
set from 0000008 to 2097151. And it must key in 0 digit if disable.
z
Addr
4
:
set from 0000008 to 2097151. And it must key in 0 digit if disable.
z
Addr
5
:
set from 0000008 to 2097151. And it must key in 0 digit if disable.
