3
TORCH WIZARD INSTALLATION & OPERATION MANUAL
wire-wizard.com
2.1 MOUNTING THE TORCH WIZARD
®
Select a location within the robotic workcell that
provides the robot with the shortest approach points.
It is important to consider the robot work envelope
and any fixed obstructions or potential interference.
▶ Mount the Torch Wizard® to a stable platform
that is parallel to the floor for best results
(an optional stand is available). Use the
(4) 11/32 mounting holes provided on
base of the Torch Wizard® to secure the
unit to the platform.
▶ It is recommended that (4) M8 – 1.25 SHCS
(Socket Head Cap Screws) are used to
mount the Torch Wizard® to the platform
(the optional stand provides M8 – 1.25
tapped holes for mounting).
2.0 INSTALLATION
Optional Wire Cutter
Location
Motor
Slide-Up
Cover Latch
Internal
Access Panel
Reamer
Blade
Mounting Location
for optional
Tool Center Point
Motor
Lubricated and
Filtered Air In
Electrical Connection
(9 pin)
Catch Tray
Figure 1: Torch Wizard Components (EL-NCS-20 shown)
Bolt Pattern (same for all models)
Figure 2
