When using the electrical appliance, the following basic
safety precautions should always be followed. Please read
these instructions carefully. Pay your special attention to
important safety instructions. Keep this
“
Instructions for
use
” for future reference.
If you are using the kettle for the first time, it is
recommended that you clean your kettle before use by
boiling a full kettle of water twice and then discarding the
water.
1.
Open the lid, fill with the desired amount of water to the
water kettle. Always fill the kettle between the minimum
and maximum marks inside the kettle. Too little water will
result in the kettle switching off before the water has
boiled.
NOTE:
Do not fill the water over the maximum level, as water may
spill out of the spout when boiling. Ensure that the lid is firmly in
place before connecting the power cord to the outlet.
2.
Connect the plug into a power outlet. Press the switch
downwards on the handle. The indicator will light up. Then
start to boil the water. The kettle will switch off
automatically once the water has boiled. You can shut off
the power by pressing the switch button upwards at any
moment during boiling water.
NOTE:
Ensure that switch is clear of obstructions and the lid is
firmly closed. The kettle will not turn off if the switch is constrained.
3.
Take the plug out of the outlet. Lift the kettle then pour
the water.
NOTE:
Operate carefully when pouring the water from your kettle
as boiling water will scald.
HOW TO OPERATE
GENERAL INSTRUCTIONS
SAFETY INSTRUCTIONS
