SERVICE MANUAL & ICA
WIPLINE 4000 FLOATS ON CESSNA A185E, A185F, AND 206 SERIES
Page 34
Revision G
P/N 1002552
Brake
Assemblies - inspect for
wear
, corrosion, leakage.
X
Hydraulic Fluid Screen - clean and inspect.
NOTE:
if floats sit
for extended periods of time (I.e. if removed during winter months), screen should be
cleaned before putting floats
back into service. Hydraulic
fluid in reservoir should be
checked for moisture or other contaminates and changed if necessary
.
X
Main and nose gear actuator
,
assemblies - inspect for condition, lubrication, leakage, corrosion and cleanliness.
X
Nose gear springs - scotch- ply springs, inspect for cracks, delamination and paint.
X
Main gear drag link garlock bushings - inspect for condition, lubrication, corrosion.
X
Main gear oleos - inspect for evidence of leakage, proper extension, check cylinder for corrosion, pitting, cleanliness and security
.
X
Hydraulic lines and fittings -
inspect for leaks, condition and security
.
X
Hydraulic manifolds (if equipped) - inspect for condition, security and leaks.
X
INSPECTION TIME LIMITS
HOURS
MECH INITIALS
25
50
100
200
RT
LT