SERVICE MANUAL & ICA
WIPLINE 13000 FLOATS
Page 54
Revision H
P/N 1002548
Bolts in Critical Areas
– For corrosion, correct torque when installed, or when visual inspection indicates a need
for a torque check.
Nut torque should be applied depending on the hardware application, unless the torque is specified for a certain
joint in this manual or installation drawings.
** A Torque of 80% should be used when Tef-Gel is applied to the bolt.
Electrical Connections
– Apply SP-400 SOFT SEAL or LPS 500 to all electrical connections to prevent
corrosion.
Hydraulic Fluid
– For use in all hydraulic systems, including brakes: MIL-H-5606.