
SERVICE MANUAL & ICA
8750 AMPHIBIAN/SEAPLANE FLOATS ON CESSNA 208/208B
P/N 1005723 Doc. No. W8750-24-01
Page 82 of 104
Revision F
9.0 SERVICING INSTRUCTIONS
As coded in the Inspection Time Limits chart in this section, there are items to be checked each
25, 50, 100, and 200 hours. Also, there are notes on special items which may require servicing at
more frequent intervals.
* When conducting an inspection at 25 hours, all items marked for 25 hours would be
accomplished.
* at 50 hours, the 25 and 50-hour items would be accomplished.
*at 100 hours, the 25, 50, and 100-hour items would be accomplished.
* at 200 hours, the 25, 50, 100 and 200-hour items would be accomplished.
* A complete inspection (Annual Inspection) would include all 25, 50, 100, 200 hour
items.
Below is a list of recommended lubricants and “protection” products when servicing float hull
and other amphibious components. This lists products used by Wipaire during assembly of the
floats.
There may be equivalent products just as satisfactory for protection. However, it is
recommended if trying different products, to inspect them frequently so as to determine their
effectiveness.
Protection of nuts, bolts, hydraulic lines,
metal surfaces, or electrical connections.
Dinitrol AV30
Dinol Group
General Lubricants
LPS 1, LPS 2 and LPS 3
LPS Industries
CRC – SP400 Soft Seal
CRC Industries
Oil Bath Wheel System
Aeroshell Multigrade W 15 W 50 Oil
Shell Global Solutions*
*For main gear assemblies including the oil bath wheel system, any standard engine oil is
acceptable.