35
WINYCAM BRAVO
사
용
하
기
How to use
▶ How to calibrate scree after booting
Loading Logo will be up after a
firmware is completed.
Touch a yellow dot correctly.
Touch a screen in any point.
Touch a yellow dot correctly.
Touch a yellow dot correctly.
If you touch wrong point during calibration, press REC button. Then
it will be initialized and loading screen will be shown. Keep pressing
REC button, a calibration button can be skipped.
Note
Froware Upgrade- Touch Calibration
Touch anywhere except button and
confirm calibration is completed.
OK :
Completed calibration and turn to
Normal REC mode.
RESET :
Go back to a test calibration
screen.
CANCEL :
uncompleted a calibration and
turn to Normal REC mode.
